Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Falcate" Chef's, slicing, carving, trimming, utility knife in T3 cryogenically treated ATS-34 high molybdenum martensitic stainless steel blade, 304 stainless steel bolsters, Majestic Agate gemstone handle, stand of zebrawood and ash hardwoods, base of Baltic Brown Graniite
"Falcate"

Trifid

"Trifid" obverse side view in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Brecciated Jasper gemstone handle, Ostrich leg skin inlaid in hand-carved leather sheath
"Trifid" Fine Handmade Knife
  • Size: Length overall: 8.25" (21.0 cm), Blade Length: 4.0" (10.2 cm), Thickness: .196" (5.0 mm)
  • Weight: Knife: 5.3 oz. (150 grams) Sheath: 4.2 oz. (119 grams)
  • Blade: 440C High Chromium Martensitic Stainless Steel, Hardened and Tempered to Rockwell C58, mirror polished
  • Fittings: Hand-engraved 304 Austenitic High Nickel, High Chromium Stainless Steel
  • Handle: Brecciated Jasper Gemstone (Africa)
  • Sheath: Hand-carved Leather Inlaid with Ostrich Leg Skin
  • Knife: The Trifid is named for a beautiful Nebula in the constellation Sagittarius. This outstanding piece of meticulous craftsmanship took many hours to create, and it was worth it. The blade has a very graceful light trailing point and is deeply hollow ground in 440C high chromium austenitic stainless tool steel. The grind lines are clear, crisp, well-matched and brightly mirror polished surfaces abound. The blade is razor keen and thin at the fine point: an elegant cutting instrument. The knife blade is completely hand-fileworked with a deep, punchy pattern of square and round cuts in the fully tapered tang, from the tip of the spine to the significant choil which terminates the cutting edge. The knife is bolstered with zero-care 304 high nickel, high chromium austenitic stainless steel, into which I have hand-engraved a deep and intricate pattern of knotted paisley style. Did you know that the paisley type of design component is very ancient and derived from earliest Greek depictions of dolphins and not gourds or vegetables as some think? Most makers would not attempt to hand-engrave 304 stainless steel because it is so incredibly tough and hard, but it is the absolute premium bolster material that this knife deserves. The bolster engraving compliments the complexity of the filework and the angularity of the gemstone handle pattern. The gemstone I chose for the handle is Brecciated Jasper from Africa, brightly and cleanly ground and finished to a glassy luster. Brecciated Jasper has always fascinated me, because of the intense and eons-long process that has occurred to create the stone. First, sedimentary rock was laid down that had high iron content, perhaps even from earth's early ancient seas that were rich in iron while the atmosphere was lacking oxygen. The iron is what makes these rocks red. Then, over millions of years, these iron-rich sedimentary rocks are subject to the intense and prolonged pressure and temperature beneath the earth's surface, and form compressed microcrystalline quartz (Jasper). After that, at some time, the rock is subjected to tremendous stresses and cataclysmic forces that shatter the rock in to millions of pieces (thus the breccia which means broken fragments of rock). Many more millions of years pass, and the broken pieces are fused together in a solid, uniform mass that is bonded under the heat and pressure of the earth's crust. So bonded are the pieces that they become one uniform and complete stone, varying only by color. Looking into this handle can be awe-inspiring, even more so under a magnifier. If you love rock like I do, you'll be taken to wonder about how it all the geologic process happened. The stone on this knife is extremely solid, hard and durable, and will absolutely far outlast the knife. So, maybe in millions of years, someone may wonder about this cut and polished gem. On the knife, the gemstone feels cool and solid, and the balance point of the knife is just behind the forefinger groove at the placement of the middle finger. The blade feels light and effortless in the hand.
  • Sheath: I wanted a special sheath for this knife, one that compliments the color and pattern of the gem. I made this sheath in 9-10 oz. leather shoulder, carefully hand-carved with scalpels and microblades to accept full panel inlays of Ostrich leg skin dyed a burgundy color. The skin is tough and glossy, and the scale pattern on the surface reflects the filework and brecciated pattern of the gemstone knife handle. The knife has panel inlays front and back; even the belt loop is inlaid. I've hand-stitched the sheath together with polyester sinew, and it is lacquered and sealed throughout.
  • An elegant and handsome knife for collection or use; a work of art.

Thanks, S.E.!


Hi Jay;
I have just spent the last half hour staring at the knife which I received today. Words such as "AWESOME, WOW, UNBELIEVABLE" described my initial reaction. I looked at the knife over and over again. Each time admiring a different facet. I chose that word because like a fine diamond, each and every time it is looked upon, you see a different facet as it reflects the light at different angles. The analogy is striking. The quality of workmanship is extraordinary. The cut-outs along the spine, then into the handle, and under the handle add so much to the knife. The meeting of metal and gemstone is so exact one cannot see any space between the two materials. I have difficulty putting two pieces of wood together properly. The blade has a wonderful polished finish which contrasts the engraving on the handle. To truly appreciate the time, effort, artistic talent and artistic vision, one needs to view this as fine art first. Then can see this as a knife, an incredible one at that.
Yours truly,

--S.E.


Please click on thumbnail knife photos
"Trifid" reverse side view. Knife sheath is inlaid with full panel inlays of Ostrich leg skin, even on back and belt loop "Trifid" spine edgework, filework detail. Filework is bold and punchy, reflecting angularity of handle material "Trifid" inside handle tang view. Bolsters are dovetailed high chromium, high nickel stainless steel, handle is bedded and sealed gemstone "Trifid" obverse side handle detial. Gemstone is Brecciated Jasper from Africa, rich bold reds pinks, whites and microcrystalline agates and quartzes "Trifid" reverse side handle detail. Handle lines are clear and elegant, forefinger groove is comfortable "Trifid" obverse side front bolster detail. Engraving is Paisley-adaptation, hand-engraved in high nickel,  high chromium stainless steel. "Trifid" reverse side rear bolster engraving detail. Engraving is knotted and deep, surface is mirror polished "Trifid" point detail. Spine of knife has light trail, where the point ends higher than the spine, making for a graceful and super-sharp knife cutting edge and point. "Trifid" sheathed view. Sheath is deep and protective, tough ostrich leg skin compliments leather and knife. Surfaces are clean, smooth and glossy. "Trifid" sheath mouth detail. Heavy sheath protects knife with beauty.

To Knives for Sale page

To Featured Knives Pages


XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels